 |
 |
 |
|
D4-9 Package 9,000-lbs. Capacity Four-Post Lift / Standard Rise, Standard Length / Includes Caster Kit, Drip Trays, and Aluminum Ramps
SKU 5175319
Dannmar’s D4-9 is a great lift for many reasons. With its 9,000 lb. lifting capacity, it can typically handle close to twice what the average vehicle weighs. Dannmar’s D4-9 is straightforward to install on level concrete. As delivered it comes with a caster kit, drip trays, plus lightweight and strong aluminum ramps. By installing this lift, you can add a place to store a vehicle and also to perform many repairs and maintenance jobs. Check out Dannmar’s 9K section to see what other options are available.
Dannmar’s D4-9 four-post vehicle lift is built sturdy and strong. Each includes quality features like dual-hub cable sheaves. These are more expensive to manufacture, but it’s not a cost we pass along. Dannmar includes them to prevent axles, sheaves and cables from burning out. Dannmar lifts also include multi-level locking positions, so that you can safely secure your four-post lift at multiple heights managed by an electric-hydraulic power system. Each lift comes with four lifting cables made from superior-grade stainless steel. The individual cable is rated to handle 14,400 lbs. making the combined cable rating over 640% of the total capacity. Big 10" x 12" base plates keep the lift securely in place on level concrete. A Four-piece caster kit that fits all Dannmar 9K four-post lifts allows the lift to be moved, even with a car on top while you move it. All lifting cables, airlines, safety latches and sheaves are routed internally throughout the car lift. Four-post runways built to a low 4.5" that are undercarriage-friendly for short wheelbase sports cars, lowered vehicles, and everyday cars.
Dannmar D4-9
| Dannmar D4-9 Package |
| Lifting Capacity |
9,000 lbs. (4,082 kg) |
| A - Min. Runway Height |
5” (127 mm) |
| B - Max. Rise |
70” (1,778 mm) |
| C - Max. Lifting Height |
75” (1,905 mm) |
| D - Height of Columns |
89” (2,261 mm) |
| E - Drive-Thru Clearance |
86” (2,184 mm) |
| F - Overall Width |
114.5” (2,908 mm) |
| G - Width Between Columns |
98” (2,489 mm) |
| H - Overall Length |
203” (5,156 mm) |
| I - Outside Columns |
176.5” (4,483 mm) |
| J - Width Between Runways |
37.5” (953 mm) |
| K - Runway Centerline |
53.75” (1,365 mm) |
| L - Outside Edge of Runways |
72.5” (1,842 mm) |
| M - Runway Width |
18.75” (476 mm) |
| N - Length of Runways |
165.5” (4,204 mm) |
| Min. Wheelbase @ Rated Capacity |
115” (2,921 mm) |
| Min. Wheelbase @ 75% Capacity |
100” (2,540 mm) |
| Min. Wheelbase @ 50% Capacity |
85” (2,159 mm) |
| Min. Wheelbase @ 25% Capacity |
70” (1,778 mm) |
| Locking Positions |
13 (spaced every 4” / 102 mm) |
| Time to Full Rise |
60 seconds |
| Motor |
110VAC, 50-60HZ, 1PH, 20A or 208-230VAC, 50-60HZ, 1PH, 25A |
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Long approach ramps for low-ground clearance vehicles
- Runways include rail-kit for optional accessories
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks and sheaves
- Internal anti-sway slider blocks in each column
- Pneumatic push-button safety release
- Heavy-duty 1/2” aircraft cable and 1.75” roller axles
- Safety locks enclosed in columns minimize pinch points
- Oversized sheave diameter reduces cable fatigue
- Large self-lubricating cable rollers
- Multi-position safety locks in each column
- Customizable power unit location
- Approach ramps incorporate built-in rear-wheel chocks
- Independent backup slack-cable safety latches
- Runways feature smooth durable surface
- Optional drive-thru ramps available
- Optional drip trays available
- Optional 4,500-lb. capacity rolling jacks available to raise front or rear of vehicle
|
|
|
|
|
|
|
