Ranger RP-20FC
Commercial Grade Filter and Can Crusher
This oil filter crusher and paint can crusher expertly crushes even
your toughest filters and cans to 20% - 25% of their original size in
seconds. At the drastically reduced size, cans and oil filters are much
cheaper to dispose, so the Ranger RP-20FC is good for the environment
AND your bank account. Perfect for crushing light-duty truck and
automotive filters. Even those 8" tall filters found in power stroke
diesels will fold under the massive force of this crusher.
The average auto repair shop ends up with hundreds or even thousands
of oil filters every year, all filled with sludge and used oil from
engines. Because of this, used filters are viewed as contaminated waste
by the EPA, which mandates tough disposal regulations. This crusher
separates 95% of the waste oil from the metal and recycles it into a
storage container of your choice for proper disposal. This means that
rather than having a stack of bulky, dirty oil filters sitting in your
shop, you end up with a neat pile of clean scrap metal and an
easy-to-manage container of used oil that can be disposed of cheaply and
conveniently. Best of all, the entire process is in full compliance
with EPA disposal guidelines.
The Ranger RP-20FC oil filter crusher provides the perfect solution
for getting rid of used filters. Once crushed, you can deliver them to a
metal recycling facility where you’ll get paid for the scrap value of
the metal. This is a much better solution than paying a fee to deliver
the used filters to an approved recycling collection center.
When you consider the cost of typical EPA-approved oil filter
disposal for contaminated waste and consider the return you will receive
from a scrap metal dealer and oil collection company, the RP-20FC pays
for itself in no time.
Stand included
The included stand is perfect for supporting the RP-20FC oil filter
crusher on top. Conveniently place your oil storage tanks within the
stand for clean, efficient collection of residual draining oil.
The stand’s rugged metal construction is recommended for use with the
Ranger RP-20FC Oil Filter Crusher. Its generous design accommodates 5,
16 and 55-gallon used oil storage tanks, and the tanks fit even when
even they’re positioned on top of drum dollies. Residual oil sludge will
drain right into your storage tank.
The stand itself is constructed from robust metal and holds over 230
lbs. of oil. You won’t have to worry about knocking into barrels of oil
ever again. Setup is fast and easy, even if you’re new to this type of
shop equipment. Simply put, putting an oil filter crusher stand in your
shop is a great way to keep the entire process together and make your
shop life that much better.
You'll also be delighted by the space-efficiency and safety this unit
brings to your work area. Simply slide storage barrels beneath the
stand and you're done! The tanks are now ready to receive waste oil from
the crusher's downspout tube. It doesn't get any simpler.
If you need even more crushing power, the RP-50FC is Ranger’s latest
and most powerful oil filter crusher yet, offering 50,000 lbs. of
crushing force.
- Save on disposal costs and storage space
- Fulfills EPA and other mandated environmental standards
- No-mess design operates clean and efficiently to lessen spill hazards
- Single-control valve operation
- Exclusive X-shape bevel in press head pre-aligns filters for absolute vertical press
- Welded steel plate construction
- 12-1/2" diameter cylinder providers a maximum crushing pressure of 20,000 lbs
- Crushes cans in only 20 seconds
- Reduces filters to 25% of their original size
- Removes up to 95% of the oil
- 100% air operated for minimal maintenance
- Automatic safety door stops operation when opened
- Transparent door for a convenient view of the crushing process
- Pressure regulator and air moisture separator come standard
- Optional RP-20FCS stand accommodates 5, 16 and 55-gallon drums for efficient fluid handling
- Overall height: 29-1/2" / 749 mm
- Overall width: 17" / 432 mm
- Overall depth: 17" / 432 mm
- Chamber opening height: 11" / 279 mm
- Chamber opening width: 8" / 203 mm
- Chamber opening depth: 11" / 279 mm
- Average cycle time: 15 – 20 seconds
- Air input: 125 – 175 psi
- Unit weight: 228 lbs. / 103 kg
- Shipping Dimensions: 19'' x 19'' x 34'' (482 mm x 482 mm x 863 mm)
